E Glass Fiberglass Reinforced Plastic FRP Rod Reinforcement

Product Detail

E Glass Fiberglass Reinforced Plastic FRP Rod Reinforcement

Basic Info

• Description: FRP Rod/Fiber Glass Rod/E Glass Fiberglass Rod

• Specification: dimeter 0.40 mm-5.00 mm (with close diameter tolerance)

• Material: E-Glass Fiber Glass(80%) and Vinyl Ester Resin(20%) 
  

• Application: Central or peripheral strength member for fiber optical cables
  

• Certification: ISO9001, SGS

• Production Process: Pultrusion

• Color: White
  

• Origin: Jiangsu, China

• Delivery Length: 50.4 KM/Roll, 25.2 KM/Roll, 12.5 KM/Roll, or Customized

• Transport Package: Ply-Wood Pallet or as According to Requirement
  

• HS Code: 39169090




Product Description




FRP Rod strength member is to use epoxy resin as foundation combined with the strength of glass fiber through pultrusion technology to produce a new type of high performance non-metallic composite material which is used to make various optical fiber cables.




Applications

Central or peripheral strength member for fiber optical cables, such as ADSS Cables, FTTx Cables, Outdoor Cables, Indoor Cables, etc.

 

FRP Rod Features

 

1)  Insensitive to lightning strike, it is suitable for the area with frequent lightning and rain.

2)  Free from interference, it can resist induction interference; It can be installed close to the power line and electronic devices.

3)  Corrosion free, the GFRP eliminates harmful gas produced by the chemical reaction of metal and ointments which can negatively affect the cable’s transmission quality.

4)  Light weight and high strength, low density and high ratio of strength/weight;

5)  FRP strength member for optical cable is bullet-proof and anti-rodent and anti-termite.




Technical Parameter

  

FRP Test Item	Unit (or Condition)	Technical Parameter
Appearance		Smooth surface, no bur, no crack
Diameter Tolerance	%	±2
Density	g/cm3	2.05~2.15
Tensile Strength	MPa	=1100
Elastic Tensile Modulus	GPa	=50
Bending Strength	MPa	=1100
Flexural Modulus	GPa	=50
Elongation at Break	%	=4
Coefficient of Linear Expansion	1/°C (-30°C ~ +80°C)	=8×10-6
Heat Shrinkage	%	0
Water Absorption	%	=0.1
Minimum Bending Radius	mm (20°C ± 5°C)	40D
High Temperature Bending Performance	(50D, 100°C, 120h)	No bur, no crack, no break, smooth surface, back to   original straight
Low Temperature Bending Performance	(50D, -40°C, 120h)	No bur, no crack, no break, smooth surface, back to   original straight
Twisting Test	±360°/m	Non-disintegration